Search results for "Fusion welding"
showing 10 items of 18 documents
Friction Stir Welding of Ti6Al4V complex geometries for aeronautical applications: a feasibility study
2020
Abstract While Friction Stir Welding (FSW) of aluminium alloys can be considered a mature technology, even for complex joint morphologies, as T joints welded “in transparency”, welding of hard material still presents several open issues. In fact, welding of titanium alloys is a challenging process due to the chemical, mechanical and thermal characteristics of such materials which are subjected to atmosphere contamination resulting in joint hydrogen, oxygen and nitrogen embrittlement; additionally, due to the high melting temperature, large distortion and residual stress are found in joints obtained by traditional fusion welding processes as gas metal arc welding, electron beam welding and l…
Application of linear friction welding for joining ultrafine grained aluminium
2020
Abstract Ultrafine grained (UFG) materials are of great potential in industry due to their enhanced mechanical strength and other promising features, such as ability to superplastic deformation or excellent corrosion resistance. Nevertheless, one of the main limitations lies in their low thermal stability, which leads to excessive grain growth at elevated temperature. It influences mainly further processes performed at high temperature, such as joining. It causes detrimental problems during conventional fusion welding, as significant grain growth is observed and therefore the advantages as a result of small average grain size disappear. Therefore, the idea of applying solid state joining pr…
A Neural Network Based Approach for the Design of FSW Processes
2009
Friction Stir Welding (FSW) is an energy efficient and environmentally "friendly" welding process. The parts are welded together in a solid-state joining process at a temperature below the melting point of the workpiece material under a combination of extruding and forging. This technology has been successfully used to join materials that are difficult-to-weld or ‘unweldable’ by fusion welding methods. In the paper a neural network was set up and trained in order to predict the final grain size in the transverse section of a FSW butt joint of aluminum alloys. What is more, due to the relationship between the extension of the “material zones” and the joint resistance, the AI tool was able to…
Friction Stir Welding Lap Joint Resistance Optimization Through Gradient Techniques
2007
In recent years, scientific interest on friction stir welding (FSW) has grown more and more since such a joining technique allows one to weld lightweight alloys that are rather difficult to weld or even “unweldable” with the classic fusion welding operations. Furthermore, few industrial applications of the process are already known in different manufacturing fields. In this paper, the optimization problem of a FSW lap joint for automotive applications is investigated, taking into account process parameters such as the tool rotating speed and the tool feed rate; a numerical gradient technique is applied for the optimization procedure reducing the number of experimental tests to be developed.
Comparison between FSW and bonded lap joints - A preliminary investigation
2017
Difficult to weld aluminium alloys can be effectively joined by different alternative processes. Friction Stir Welding (FSW), among the solid-state processes and adhesive bonding represent two very attractive techniques. They allow the production of highly resistant joints avoiding the formation of the typical fusion weld defects. The aim of this work is to identify, analyse and compare the mechanical properties of AA6016 aluminium alloy joints made out of 1 mm thick sheets. FSW lap joints were and epoxy bonded joints were produced. Using the FSW results as benchmark, the overlap required in the bonded joint was identified to ensure the same static strength. Once the geometric configuration…
Effect of Process Parameters on the Joint Integrity in Friction Stir Welding of Ti-6Al-4V Lap Joints
2013
Friction Stir Welding (FSW) is a solid state welding process patented in 1991 by TWI; initially adopted to weld aluminum alloys, is now being successfully used also for magnesium alloys, copper and steels. The wide diffusion the process is having is due to the possibility to weld materials traditionally considered difficult to be welded or “unweldable” by traditional fusion welding processes due to peculiar thermal and chemical material properties. Additionally, the process allows welding a wide range of sheet thickness (up to 50mm) avoiding typical fusion welding processes defects, like cavities and porosities, with no shielding gas, filling material or joint preparation. Recently, researc…
Infrared thermography for monitoring heat generation in a linear friction welding process of Ti6Al4V alloy
2017
Abstract The increasing use of titanium alloys in a wider range of applications requires the development of new techniques and processes capable to decrease production costs and manufacturing times. In this regard welding and other joining techniques play an important role. Today, solid state friction joining processes, such as friction stir welding, friction spot welding, inertia friction welding, continuous-drive friction welding and linear friction welding (LFW), represent promising methods for part manufacturing. They allow for joining at temperature essentially below the melting point of the base materials being joined, without the addition of filler metal. However, the knowledge of te…
A continuum based fem model for friction stir welding—model development
2006
Although friction stir welding (FSW) has been successfully used to join materials that are difficult-to-weld or unweldeable by fusion welding methods, it is still in its early development stage and, therefore, a scientific knowledge based predictive model is of significant help for thorough understanding of FSW process. In this paper, a continuum based FEM model for friction stir welding process is proposed, that is 3D Lagrangian implicit, coupled, rigid-viscoplastic. This model is calibrated by comparing with experimental results of force and temperature distribution, then is used to investigate the distribution of temperature and strain in heat affect zone and the weld nugget. The model c…
In-process heat treatments to improve FS-welded butt joints
2008
Friction-stir welding (FSW) is a relatively new but already well known solid-state welding process whose main advantage with respect to fusion welding processes is the possibility to successfully weld light alloys, traditionally considered difficult to weld or unweldable. Despite the good mechanical performances that can be obtained, there exists the possibility to further improve the joints' effectiveness through post-welding heat treatments that are however time and cost-expensive and, therefore, not best suited for industrial applications. In the present paper, the authors report the results of an experimental campaign, developed on FSW of AA7075-T6 aluminum alloy, aimed to investigate t…
Mechanical and microstructural properties prediction by artificial neural networks in FSW processes of dual phase titanium alloys
2012
Abstract Friction Stir Welding (FSW), as a solid state welding process, seems to be one of the most promising techniques for joining titanium alloys avoiding a large number of difficulties arising from the use of traditional fusion welding processes. In order to pursue cost savings and a time efficient design, the development of numerical simulations of the process can represent a valid choice for engineers. In the paper an artificial neural network was properly trained and linked to an existing 3D FEM model for the FSW of Ti–6Al–4V titanium alloy, with the aim to predict both the microhardness values and the microstructure of the welded butt joints at the varying of the main process parame…